Applied AI For Unmanned Oil & Gas Facilities?

In this article, and my next few articles, I will focus on cutting through the hype of AI to explore pragmatic, real-world use cases for AI from an operations perspective as opposed to a data science perspective.

In this article the intent is to explore AI in the context of unmanned aka not-normally manned facilities.

Simply taking an existing facility, bolting on AI and declaring unmanned operations an unmitigated success amid fanfare, smoke and mirrors is the worst possible scenario.

We need to start with the fundamentals. A facility needs to be designed from the ground up, in the case of green-field, or re-engineered appropriately, in the case of brown-field, to support unmanned or not-normally manned operations – period.

What specifically do I mean?

An unmanned facility mandates a highly instrumented solution. The facility has to be designed or re-engineered to be as inherently reliable as possible by design. Single point failures need to be designed-out and redundancy installed for critical functions. The probability of significant trip events needs to be minimised. Utilisation of proven, reliable equipment augmented with contemporary technology.

Assuming we have a fit-for purpose, inherently reliable facility, it doesn’t stop there. We need to properly support the facility throughout its life-cycle. Again, what specifically do I mean?

The facilities need to be supported with highly skilled, multi-disciplined campaign style maintenance crews. Training and retaining highly skilled, multi-disciplined campaign style maintenance crews brings its own challenges.

It is essential to understand and optimise the key limiting factor(s) that ultimately determine/fix the frequency for maintenance and thus impact the planning and scheduling around mobilisation of campaign style maintenance crews.

The facilities and maintenance crews need to be supported with an appropriate repair and spares strategy and focused spare part holding regime commensurate with the unmanned philosophy and campaign style maintenance – this is very different from a manned facility.

An unmanned facility is NOT a low cost option from a Capex perspective.

The two extremes of unmanned facilities that I can think of are a land based remote facility with little or no infrastructure complete with challenging logistics versus a remote offshore facility tied-back to a central processing facility. In an offshore facility the capex overhead of installing additional redundancy for critical functions can be partly offset by not having to engineer a large accommodation module or heavy jacket structure for example. In an unmanned/not normally manned facility significantly fewer people are exposed to risk for significantly reduced periods of time although risks peak during mobilisation and demobilisation activities.

Where does this leave Applied AI? I see Applied AI, Deep Machine Learning and Natural Language Processing being of value in 4 main areas:

  • Predictive Analytics
  • Decision Support
  • History
  • Data

In my view, the combined technology is about reducing uncertainty in a given process or outcome and correlating, seemingly unconnected, disparate sources of data in a meaningful way to provide useful information as the datum for decision support. Some of this technology and mode of application is available currently and some is future state, the intent is to explore what the future could look like and how Applied AI could help. I will explore specific areas in future articles.

Predictive Analytics

  1. Very early identification of developing anomalies - both known & unknown.
  2. Labelling of known anomalies including an estimate of probability/certainty.
  3. Tagging of unknown anomalies and identification of historical close matches including an estimate of probability/certainty.
  4. Consolidation of the corroborating data/evidence (condition based, process, machine, unstructured) indicating the number of independent sources of data that corroborate the prediction.
  5. Estimated warning time until functional failure including an estimate of probability/certainty.
  6. Recording operational context and anomaly signature.
  7. Correlation of the timeline & sequence of events with the facility event log.

Decision Support

  1. Decision support data to support a risk optimised emergency response or required course of action – in the first few Seconds/Minutes/Hours.
  2. Decision support data to support the safe, continued operation of the plant including safe operation period & estimate of probability/certainty.
  3. Decision support data to provide a quantified risk of continued operation in terms of safety, environment, image, consequential additional secondary damage/repair costs.
  4. Decision support data to identify available mitigation options, including: installed spare, cannibalisation, formal deviation, bypass/re-routing/plant re-config, reduced throughput, temporary equipment etc.
  5. Decision support data to identify the next planned outage date and projected scope.
  6. Decision support data to identify other opportunistic maintenance that could be pulled forward, planned and scheduled if equipment outage is required, identification of work orders which are currently pending/in backlog.
  7. Decision support data to identify & support mandatory work process requirements to resolve issue (Formal Risk Assessment / Deviation / MoC / Control / Reportable Incident / Requirement To Inform Authorities / Regulatory Bodies etc).
  8. Decision support data to identify the impacted Plant/Systems/Packages/Skids/Functional Locations/Equipment/Make/Model/Serial Numbers/Data Sheets/Drawing Refs/Materials/BOMs etc.
  9. Decision support data to identify spare parts historically consumed for repairs, the availability from stock of the identified spare part and/or estimated lead times.
  10. Decision support data to identify additional/specialist resources, support, special tooling, chemicals, consumables, deviations/controls required to be put in place.


  1. Historical data to support the identification of any precedence of a technically similar anomaly occurrence on same/other similar equipment?
  2. Historical data to support the identification of the risk exposure in terms of safety, environment, image, production, repair, spares, resources etc for any previous technically similar occurrences.
  3. Historical work order data of technically similar equipment and RCAs to support the path forward?
  4. Historical data of technically similar anomalies to identify/frame additional resources, support, special tooling, chemicals, consumables, spare parts, deviations/controls that might be required.
  5. Historical data to quantify which spare parts were previously consumed, their stocks levels and/or estimated lead times?


  1. The potential for AI to assist Master Data is vast but most data science examples center around the wrong issues or non-existent issues.
  2. Data is one the biggest issues facing the Oil & Gas Industry going forward and has been getting steadily worse in the last 25 years, not better.
  3. In order to have a disruptive influence and step change in this area we need to stem the flow of poor quality data in preference to trying to apply corrective measures once the damage is done.
  4. As an industry we need to fundamentally change how we currently technically specify, collect and use/analyse data.
  5. For example, one of the biggest challenges in the Oil & Gas industry is spare part data. When a failure occurs and spares are required, more often than not the WMS does not contain any spares/materials information or, commonly, the wrong spares/materials data. The more we know about a tag from source data the better chance we have of identifying the correct spare parts which correlate with the installed base on site.
  6. The more correlating “meta” or “characteristic” data we have for a tag then the better the chance of accurate identification.
  7. Taking a very simplistic example, if we have an equipment’s correct tag number and original purchase order information this simple relationship can narrow down the range of possibilities or, in other words, increase the probability that we are correct exponentially. It may be the case that if the tag was supplied under the stated purchase order then only 2 or 3 types of the same device were supplied in the PO therefore the range of options have been narrowed from 1000s to 2 or 3.
  8. Using AI to develop these intelligent networks and providing the data in an AI friendly way to start with, I am convinced is the way forward.

In an unmanned/not normally manned facility the problems are exacerbated, you have to mobilise to site with a right first time mindset, with the appropriate skilled resources, with the correct spares and a clear, focused scope of work.

AI can be of significant value in this context starting with very early detection of developing anomalies which in turn provides the widest possible planning and scheduling window to give humans the headspace required to make correct, optimal, informed decisions underpinned by meaningful data. Integrating and corroborating disparate historical and predictive data sources in this way helps fully utilise historical data to address the immediate issues but also enhance predictive tools to further improve going forward. 



Film Review: ‘Once Upon a Time in Hollywood’

Image result for once upon a time in hollywood

Once Upon a Time in Hollywood’ is the ninth and latest film from acclaimed, well-known director, Quentin Tarantino released in 2019 which explores a revisionist take based partly on the infamous Manson murders in 1960’s Hollywood, which is when the film is set. The film focuses on fictional actor Rick Dalton (Leonardo DiCaprio) and his stunt double friend Cliff Booth (Brad Pitt). Rick Dalton is the film’s central protagonist, who is known for starring in Westerns and follows the actor and his stunt double as they navigate the changing nature of the film business during this tumultuous time in Hollywood. 

The film also features a sub-plot featuring actor Sharon Tate (Played by Margot Robbie) before the Manson murders took place. The film also features Mike Moh as notorious martial arts actor, Bruce Lee and Damon Herriman as infamous criminal, Charles Manson, who orchestrated the infamous Manson Murders, which culminates in a particularly bloody sequence towards the end of the film….

During the film, director and writer Quentin Tarantino’s revered filmmaking talents as an expert of his craft are demonstrated throughout with his convincing portrayal of 1960’s Hollywood, which is shown in the clever writing and dialogue, and in typical Tarantino fashion keeps the audience engaged throughout with well-written, witty and natural comedic dialogue from the characters, with particular highlights including “Tarantino’s trademark sudden bursts of violence help to keep the viewer ‘on the edge of their seat’. Tarantino also shows a clear passion and love for filmmaking of both the era and of filmmaking in general, with one particular conversation scene of Rick and a young girl talking about acting being a highlight.

Tarantino’s convincing portrayal of 1960’s Hollywood in the dialogue  is only added to by cinematographer Robert Richardson’s excellent use of mise-en scene in every frame, with plenty of authentic details throughout, such as vehicles of the era authentically replicated and other architectural details replicated such as movie theatres of time (including a drive-in theatre). 

The performances throughout from the actors are enjoyable to watch and add to the wittiness of the already well written dialogue, with Leonardo diCaprio and Brad Pitt’s performances as Rick and Cliff respectively being particular highlights, which shows a natural friendly chemistry between the two friends, which remarkably does not feel forced in any way, which further shows the clear talents of the actors.


Good Morning Dubai!


It's a beautiful day in Dubai...



Play With Us!




The Morning After The Storm!


The morning after the storm and all is well!


It's A Dog's Life!


It's A Dog's Life! Chilling and soaking up the afternoon sun in Dubai!


Stunning Morning in Dubai!


It's a stunning morning in Dubai. Thank you to our reader for the photo.


Novo IMAX Open At IMG Worlds!


The stunning new Novo IMAX Cinema is open at IMG Worlds Of Adventure! This is significant because it is now the largest IMAX screen in the region. It is well worth the trip to IMG Worlds Of Adventure to experience the

state-of-the-art sound and picture quality. The 3D effects were of course amazing but what struck me was the crystal clear audio which wasn't overdone and "shouty" as often is the case in large cinemas.

The whole experience was cutting edge from start to finish with a contemporary feel throughout from the entrance area to the box office, food zone and screening areas. The experience is heightened as you ascend the huge escalators for what seems an eternity to the highest point in IMG Worlds Worlds Of Adventure! 

In summary, well worth going the extra mile to experience, highly recommended!



Settling In

Our new addition, a Pug-Border Terrier cross is settling in nicely...
He is super sweet and loves company and lots of cuddles.


Amazing Skies Over Dubai


Amazing skies were spotted over Dubai today. The late afternoon skies were spectacular, the scattered pattern looked very much like floating ice in a frozen lake.

Close-up of the pattern.

 Earlier on as the clouds were forming.


Stunning Dubai


Dubai has stunning architecture, beaches and parks. The Burj Khalifa offers unparalleled views and is an engineering masterpiece. Standing at 828 meters tall and clad with some 15,500 square meters of stainless steel it is a beautiful building
Read more ...


Dubai Mall Of The Emirates





It is a gorgeous morning in Dubai, 
the sun is shining and temperature is perfect.



Amazing Sun Burst In Dubai

Amazing sun burst through the clouds in Dubai. The only good camera is the camera that you have with you! In most cases these days that is a phone...


New Addition

We adopted this gorgeous Pug-Border Terrier Cross from a rescue center. He is super sweet and loves nothing better than long walks and playing ball and lots of cuddles.




This website uses cookies to give you the best possible experience, by continuing to use the website you agree to our PRIVACY POLICY